проф. др Карло Раић

Радови у часописима

1. Карло Раић, Metal ceramic joining with active filler metal in dental practice, Metallurgical and Materials Data, 2, 2, 2024, pp. 41-45
2. Rebeka Rudolf and Карло Раић, Ageing of Advanced Biomaterials, Metallurgical and Materials Data, 2, 1, 2024, pp. 1-5
3. Карло Раић, Rebeka Rudolf, Vojkan Lazić, and Peter Majerič, Survey and Challenges of Dental Metallic Materials, Metallurgical and Materials Data, 2, 1, 2024, pp. 7-13
4. Dejan Stamenković, Rebeka Rudolf, and Карло Раић, Comparative Study of the Microstructure and Properties of Cast-Fabricated and 3D-Printed Laser-Sintered Co–Cr Alloys for Removable Partial Denture Frameworks, Metals, 2023, pp. 3267-3372
5. Зоран Словић and Карло Раић, Estimation of phosphorus distribution ratio at the end of blowing in BOF, Metallurgical and Materials Engineering, 2021, pp. 425-436; 10.30544/646
6. Марија Михаиловић and Карло Раић, Algorithm for quantifying the particle size distribution of non-metallic inclusions formation in steel production, Metallurgical and Materials Engineering, 2021, pp. 437-447; 10.30544/776
7. Карло Раић, Simulation of velocity profile inside turbulent boundary layer, Metall. Mater. Eng., 26, 1, 2020, pp. 137-141
8. Карло Раић, Simplification of laminar boundary layer equations, Metall. Mater. Eng., 24, 2, 2018, pp. 93-102; https://doi.org/10.30544/347
9. Tomislav Bradarić, Zoran Slović, and Карло Раић, Recent Experiences with Improving Steel-To-Hot-Metal Ratio in Bof Steelmaking, Metall.Mater.Eng., 22, 2, 2016, pp. 101-106
10. Карло Раић, An explanation of hillock growth in thin Al films, SURFACE ENGINEERING: A JOINT PUBLICATION OF THE INSTITUTE OF METALS AND THE WOLFSON INSTITUTE FOR SURFACE ENGINEERING, 2016, pp. 1-6; 10.1080/02670844.2016.1165462
11. Marija Mihailović, Aleksandra Patarić, Карло Раић, and Zvonko Gulišija, Wetting phenomena of grooves at liquid metal/ceramics interface, METALURGIJA, 55, 3, 2016, pp. 321-324
12. Zoran Slović, Ljubomir Nedeljković, Карло Раић, and Svetlana Dević, A numerical analysis as a good tool for a prediction of final sulphur steel ladle content,, Metall. Mater. Eng. , 21, 3, 2015, pp. 143-154
13. Rebeka Rudolf, Dragoslav Stamenković, Zoran Aleksić, Monika Jenko, Igor Đorđević, Aleksandar Todorović, Vukoman Jokanović, and Карло Раић, Hydroxyapatite Coatings on Cp-Titanium Grade-2 Surfaces Prepared with Plasma Spraying, MATERIALI IN TEHNOLOGIJE, 49, 1, 2015, pp. 81-86
14. Jovana Ružić, Jelena Stašić, Višeslava Rajković, Карло Раић, and Dušan Božić, Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 22, 6, 2015, pp. 665-671
15. Marija Mihailović, Карло Раић, Aleksandra Patarić, and Tatjana Volkov-Husović, The nano-wetting aspect at the liquid-metal/SiC interface, MATERIALI IN TEHNOLOGIJE, 49, 3, 2015, pp. 413-416
16. Jovana Ružić, Davor Atanasijević, Dušan Božić, and Карло Раић, Prediction of hardness and electrical properties in ZrB2 particle reinforced metal matrix composites using artificial neural network, Metall. Mater. Eng. , 20, 4, 2014, pp. 255-260
17. Srećko Manasijević, Natalija Dolić, Карло Раић, and Radomir Radiša, Identification of Phases Formed by Cu and Ni in Al-Si Piston Alloys, METALLURGIA ITALIANA, 3, 2014, pp. 13-18
18. Jovana Ružić, Jelena Stašić, Карло Раић, and Dušan Božić, Synthesis and Characterization of Cu-ZrB2 Alloy Produced by PM Techniques, SCIENCE OF SINTERING, 46, 2, 2014, pp. 217-224
19. Svetlana Pocajt, Mirjana Ristić, Aleksandra Perić-Grujić, Viktor Pocajt, and Карло Раић, A model for cross-referencing and calculating similarity of metal alloys, Metall. Mater. Eng. , 19, 4, 2013, pp. 295-306
20. Srećko Manasijević, Srđan Marković, Zagorka Aćimović-Pavlović, Карло Раић, and Radomir Radiša, Effect of Heat Treatment on the Microstructure and Mechanical Properties of Piston Alloys, MATERIALI IN TEHNOLOGIJE, 47, 5, 2013, pp. 585-591
21. Srećko Manasijević, Zagorka Aćimović-Pavlović, Карло Раић, Radomir Radiša, and Vladimir Kvrgić, Optimisation of cast pistons made of Al-Si piston alloy, INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 26, 5, 2013, pp. 255-261
22. Zoran Slović, Карло Раић, Ljubomir Nedeljković, and Tatjana Volkov-Husović, Relationship Between the Calculated Oxygen Activity and the Sulfur Partition Ratio for Cao-Al2o3-Sio2-Mgo Slag During Ladle Refining, MATERIALI IN TEHNOLOGIJE, 46, 2012, pp. 683-688
23. Jovana Ružić, Miroljub Vilotijević, Dušan Božić, and Карло Раић, Understanding plasma spraying process and characteristics of DC-arc plasma gun (PJ-100), Metall. Mater. Eng. , 18, 4, 2012, pp. 273-282
24. Iva Milinković, Rebeka Rudolf, Карло Раић, Zoran Aleksić, Vojkan Lazić, Aleksandar Todorović, and Dragoslav Stamenković, Aspects of Titanium-Implant Surface Modification at the Micro and Nano Levels, MATERIALI IN TEHNOLOGIJE, 46, 3, 2012, pp. 251-256
25. Ivan Najdenov, Radomir Radiša, and Карло Раић, Microeconomics of the materials and energents consumption in a simulated copper casting process, METALLURGIA ITALIANA, 5, 2012, pp. 51-55
26. Ivan Najdenov, Карло Раић, and Gordana Kokeza, Aspects of energy reduction by autogenous copper production in the copper smelting plant Bor, ENERGY, 43, 1, 2012, pp. 376-384
27. Zoran Slović, Карло Раић, Ljubomir Nedeljković, and Zoran Odanović, Relationship between the common optical basicity models and the sulphide capacities of CaO-Al2O3-SiO2-MgO slag, KOVOVE MATERIALY-METALLIC MATERIALS, 50, 3, 2012, pp. 185-192
28. Srećko Stopić, Bernard Friedrich, Tatjana Volkov-Husović, and Карло Раић, Mechanism and kinetics of nanosilver formation by ultrasonic spray pyrolysis progress report after successful up-scaling (Part 2), METALL, 65, 4, 2011, pp. 147-150
29. Srećko Manasijević, Radomir Radiša, Srđan Marković, Zagorka Aćimović-Pavlović, and Карло Раић, Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg, INTERMETALLICS, 19, 4, 2011, pp. 486-492
30. Zagorka Aćimović-Pavlović, Карло Раић, Ilija Bobić, and Biljana Bobić, Synthesis of ZrO2 Particles Reinforced ZA25 Alloy Composites by Compocasting Process, ADVANCED COMPOSITE MATERIALS: THE OFFICIAL JOURNAL OF THE JAPAN SOCIETY OF COMPOSITE MATERIALS, 20, 4, 2011, pp. 375-384
31. Željko Kamberović, Dušica Filipović, Карло Раић, Miloš Tasić, Zoran Anđić, and Milorad Gavrilovski, Reduction of Ultra-fine Tungsten Powder with Tungsten (VI) Oxide in a Vertical Tube Reactor, MATERIALI IN TEHNOLOGIJE, 45, 1, 2011, pp. 27-32
32. Карло Раић, Rebeka Rudolf, Trimož Ternik, Vojkan Lazić, Dragoslav Stamenković, and Ivan Anžel, CFD Analysis of Exothermic Reactions in Al-Au Nano Multi-Layered Foils, MATERIALI IN TEHNOLOGIJE, 45, 4, 2011, pp. 335-338
33. Zagorka Aćimović-Pavlović, Карло Раић, and Ilija Belić, Modification of piston surfaces by compressed plasma flow, PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 47, 6, 2011, pp. 797-802
34. Srećko Stopić, Bernard Friedrich, Tatjana Volkov-Husović, and Карло Раић, Mechanism and kinetics of nanosilver formation by ultrasonic spray pyrolysis - Progress report after successful up-scaling (Part 1), METALL, 64, 10, 2010, pp. 474-477
35. Карло Раић, Rebeka Rudolf, Aleksandar Todorović, Dragoslav Stamenković, and Ivan Anžel, Liquid Metal/ceramic Interfaces In Dental Practice And Jewellery Manufacturing, MATERIALI IN TEHNOLOGIJE, 44, 2, 2010, pp. 59-66
36. Radovan Ćirić, Svetislav Čantrak, Карло Раић, Rebeka Rudolf, and Ivan Anžel, Distribution of the Carbide Phase in the Viscoplastic Layer during the Rotational Friction-Welding of Various Steels, METALS AND MATERIALS INTERNATIONAL, 15, 5, 2009, pp. 831-841
37. Карло Раић, Rebeka Rudolf, Borut Kosec, Ivan Anžel, Vojkan Lazić, and Aleksandar Todorović, Nanofoils For Soldering And Brazing In Dental Joining Practice And Jewellery Manufacturing, MATERIALI IN TEHNOLOGIJE, 43, 1, 2009, pp. 3-9
38. Srećko Manasijević, Radomir Radiša, Srđan Marković, Карло Раић, and Zagorka Aćimović-Pavlović, Implementation of the Infrared Thermography for Thermo-Mechanical Analysis of the AlSi Cast Piston, PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 46, 11, 2009, pp. 565-579
39. Карло Раић, Parallel glide: flow of dislocations with internal stress source/sink distribution, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 9, 1, 2008, pp. 015008-7pp
40. Карло Раић and Rajko Šašić, STM image visualization of Si(111) 7 x 7 surface (graphic simulation and implementation), APPLIED SURFACE SCIENCE, 253, 10, 2007, pp. 4501-4506
41. Карло Раић, Modelling of plasma activated CVD of Co-C-O layers in parallel plate reactor, SURFACE & COATINGS TECHNOLOGY, 200, 16-17, 2006, pp. 4816-4824
42. Zoran Anđić, Marija Korać, Miloš Tasić, Карло Раић, and Željko Kamberović, The synthesis of ultrafine and nanocomposite powders based on copper, silver anal alumina, KOVOVE MATERIALY-METALLIC MATERIALS, 44, 3, 2006, pp. 145-150
43. Radovan Ćirić, Карло Раић, Nenad Radović, Vencislav Grabulov, and Zoran Odanović, Analysis of carbon and carbide phases distribution in friction welded joints, WELDING IN THE WORLD, 49, 9 SPEC. ISS., 2005, pp. 157-170
44. Radovan Ćirić, Svetislav Čantrak, and Карло Раић, Analysis of the mechanism of joining and formation of viscous layer in friction stir welding, The Paton Welding Journal, 12, 2004, pp. 16-25
45. Карло Раић, Estimate of Si3N4 diffusion into Cu based filler metal, CERAMICS INTERNATIONAL, 26, 1, 2000, pp. 19-24
46. Карло Раић, An approach to laminar phenomena occurring on external and internal surfaces of solid specimens, INTERFACE SCIENCE, 8, 1, 2000, pp. 85-94
47. Карло Раић, Kinetics of film growth in CVD reactions, JOURNAL DE PHYSIQUE IV, 9, 1999, pp. 229-236
48. Tatjana Volkov-Husović, Radmila Jančić-Heinemann, Zvonimir Popović, and Карло Раић, Selection of calculation methods for temperature distribution in 99 mass%Al2O3 refractories, Interceram, 47, 1998, pp. 230-235
49. Tatjana Volkov-Husović, Radmila Jančić-Heinemann, Zvonimir Popović, and Карло Раић, Comparison of critical DT values with R parameter of thermally shocked alumina refractories, Interceram, International Ceramic Review, 46, 1997, pp. 12-15
50. Карло Раић, Rajko Šašić, and Menka Petkovska, Graphic simulation of STM images of Si(111)7X7 surface, KEY ENGINEERING MATERIALS, 132-136, 1997, pp. 718-721
51. Карло Раић, Numerical treatment of the plasma carburising process, SURFACE & COATINGS TECHNOLOGY, 92, 1-2, 1997, pp. 22-28
52. Карло Раић, Zorica Aćimović, Nada Novović-Simović, and Nada Vidojević, Modelling of Fe2B boride layer growth, JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 61, 3, 1996, pp. 181-188
53. Карло Раић, A simple analysis of an experimental data of grain boundary segregation of phosphorus in Fe-P alloys, ISIJ INTERNATIONAL, 36, 1996, pp. 1420-1422
54. Mile Đurđević and Карло Раић, Modeling of alloying elements influence on surface carbon content of carburized alloy steels, JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 60, 1995, pp. 809-819
55. Карло Раић, CVD as laminar phenomena with homogeneous/heterogeneous appearances - A theoretical analyses, JOURNAL DE PHYSIQUE IV, C5, 1995, pp. 235-242
56. Карло Раић, Control of gas carburising by the diagram method, SCANDINAVIAN JOURNAL OF METALLURGY, 22, 1993, pp. 50-55
57. Карло Раић, Mass transfer on heterogeneous surface of foil in laminar surrounding, ISIJ INTERNATIONAL, 33, 1993, pp. 1281-1283
58. Карло Раић, Modelling of laminar phenomena of chemical heat treating processes, ISIJ INTERNATIONAL, 32, 1992, pp. 514-520
59. Zvonimir Popović, Jagadish Nonia, Карло Раић, and Tatjana Volkov-Husović, The types of corrosion of refractory in coreless induction furnaces, Foundryman, 84, 1991, pp. 327-330
60. Карло Раић and Zvonimir Popović, Modification of the finite difference method applied to transfer phenomena in heat treating, J. Heat Treat., 8, 1990, pp. 71-73

Радови са скупова

1. Zoran Slović, Карло Раић, Tomislav Bradarić, B. Bulko, and P. Demeter, TUNDISH METALLURGY – ROUTE TO CLEAN STEEL MANUFACTURING, 4th Metallurgical & Materials Engineering Congress of South-East Europe 2019, 2019, Book of abstracts
2. Veljko Milašinović, Sergii Voinarovych, Карло Раић, Krzysztof Krasnowski, Ненад Радовић, Ana Alil, and Bojan Gligorijević, Uticaj početne dužine Cu šipki na strukturu i mikro-tvrdoću frikciono zavarenih i presovanih Al/Cu bimetalnih spojeva, Međunarodnog kongresa o procesnoj industriji, 2018, Zbornik Međunarodnog kongresa o procesnoj industriji–Procesing, pp. 187-194
3. Aleksandar Vasić, Željko Kamberović, Карло Раић, Milorad Gavrilovski, and Vesna Nikolić, BFC® SOFTWARE FOR RAW-MATERIALS OPTIMIZATION IN BLAST FURNACE SMELTING, MME SEE 2017, 2017, Book of Abstracts, pp. 71-71
4. Veljko Milašinović, Карло Раић, Nenad Radović, Radovan Radovanović, Ana Alil, and Bojan Gligorijević, Long-term and low-temperature annealing of as-continuous drive friction welded and post-weld heat treated Al/Cu bimetal joints, IX International Conference of young scientists «Welding and Related Technologies» , 2017, Proceedings of the IX International Conference of young scientists «Welding and Related Technologies» organized by Young Scientists Council of the PWI with support of the National Academy of Sciences of Ukraine, pp. 292-298
5. Rebeka Rudolf, Карло Раић, Dragoslav Stamenković, and et al, Characterization of hydroxyapatite-coated Ti surface microstructure prepared by plasma spraying, First Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2013), 2013, Proceedings and book of abstracts, pp. 349-354
6. Карло Раић, Rebeka Rudolf, Dragoslav Stamenković, and et al, Hydroxyapatite coatings on cp-Ti surfaces prepared by plasma spraying, 21st International Conference on Materials and Technology, 2013
7. Карло Раић, Rebeka Rudolf, Dragoslav Stamenković, and et. al., CFD analysis of exothermic reactions in Al-Au nano multy-layered foils, 18th Conference on Materials and Technology, 2010
8. Карло Раић, Rebeka Rudolf, Dragoslav Stamenković, and et al, Metal-ceramic interfaces in dental practice and jewellery manufacturing,, 17th Conference on Materials and Technology, 2009, (invited lecture), published in MTAEC9, 44(2)59(2010)
9. Карло Раић, Iinteraction between active plasma and growing layer of solid surface: a conceptual approach, 2nd European Process Intensification Conference, 2009
10. Карло Раић, Rebeka Rudolf, and Dragoslav Stamenković, Nanofoils for Soldering and Brazing in Dental Joining Practice and Jewellery Manufacturing, 1st International Conference on Materials and Technology sponsored by FEMS and IUVSTA, 2008, (invited lecture), published in MTAEC9, 43(1)3(2009)
11. Marija Mihailović, Карло Раић, Siniša Mesarović, and Tatjana Volkov-Husović, Multiscale Modeling of Wetting during Metal-Ceramic Joining, 10th ECerS Conf., 2007, ed. J.G.Heinrich and C. Aneziris, Proc. 10th ECerS Conf., Göller Verlag, Baden-Baden, 2007, ISBN: 3-87264-022-4, pp. 101-105
12. Marija Mihailović, Tatjana Volkov-Husović, and Карло Раић, Micro- and Nano- Scale Wetting of Reactive Metal at Metal-Ceramic Interface, CIMTEC 11, 2006
13. Giovanni Battiston, Renalda Gerbasi, and Карло Раић, Design of MOCVD film growth in a hot wall tubular reactor, CVD-XVI / EUROCVD-14, 2003, ECS Meeting, PV 2003-08, Vol.1. Ch.Modeling and simulation, pp. 249-258
14. Dušica Živković and Карло Раић, Elements of Formation of Nanosized Particles by CVD under a Laminar Regime, X WRTCS, Science of Sintering: Current Problems and New Trends, Serbian Academy of Sciences and Arts, 2003, Part II. Nanopowders and nanotechnologies, pp. 159-164
15. Arnold Nürnberg, Ralph Stolle, Georg Wahl, and Карло Раић, Interaction between active plasma and growing Co-C-O layer during PACVD, CVD-XVI / EUROCVD-14, 2003, ECS Meeting, PV 2003-08, Vol.1. Ch.Plasma CVD and other assisted methods, pp. 722-729
16. Карло Раић, Hot wall tubular CVD reactor: design and kinetics of film growth, CHISA, 2002
17. Arnold Nürnberg, Ralph Stolle, Georg Wahl, and Карло Раић, Plasma activated cvd of Co-C-O – layers. Deposition rate phenomen, CIMTEC 10, 2002, Part C, SectionF-1.2: Thin and Thick Film Deposition, pp. 91-99
18. Карло Раић, Unsteady or starting phenomena at liquid metal / ceramic interfaces, CIMTEC 10, 2002, Part C, Section H: Ceramics Joining, pp. 725-733
19. Карло Раић, Laminar phenomena during homogeneous/heterogeneous appearances, CHISA' 96, 1996, P7.87
20. Карло Раић, Effect of interfacial phenomena on reaction layer growth in metal-ceramic joints bonded with active filler metal: A conceptual approach, 4th Euro-Ceramics, 1995, ch.: Joining-mechanisms and parameters for adhesion and jioning, Coatings and Joinings, Fourth Euro-eramics, B.S. Tranchini &A.Bellosi Ed. Gruppo Editoriale Faenza Editrica S.p.A., Faenza, pp. 19-26
21. Карло Раић, Modelling of reaction layer growth in metal-ceramic joints bonded with filler metal, CIMTEC 8 , 1994, Ceramics: Charting the Future, P. Vincenzini Ed., Techna srl, pp. 2231-2238
22. Карло Раић and Zvonimir Popović, The possibilities of controlling gas carburation by the nomogram method, The 7th International Congress for the Heat Treatment of Materials, 1990, vol.I, New Processes and Aplication Experience, Thermal-chemical treatment, pp. 87-93
23. Карло Раић and Zvonimir Popović, The study of carbon diffusion during steel carburation by application of the modified finite difference method, The 7th International Congress for the Heat Treatment of Materials, 1990, vol.I, New Processes and Aplication Experience, Thermal-chemical treatment, pp. 274-281

Књиге

1. Rebeka Rudolf, Vojkan Lazić, Peter Majerič, and Карло Раић, Advanced Dental Metallic Materials, монографија, Springer Nature Switzerland, 2024, 178; ISBN 9783031473500
2. Rebeka Rudolf, Vojkan Lazić, Peter Majerič, and Карло Раић, Dental Gold Alloys and Gold Nanoparticles for Biomedical Applications, монографија, Springer, 2022; ISBN 978-3-030-98746-6
3. Rebeka Rudolf, Vojkan Lazić, and Карло Раић, Ispitivanje metalnih materijala u medicini i stomatologiji, помоћни уџбеник, Tehnološko metaluški fakultet, Beograd, 2021; ISBN 978-86-7401-378-8
4. Rebeka Rudolf, Vojkan Lazić, and Карло Раић, Metalni materijali u medicini i stomatologiji, уџбеник, RIC-TMF Beograd, 2020, 148; ISBN 978-86-7401-370-0
5. Rebeka Rudolf and Карло Раић, Ispitivanje legura zlata - Praktikum, помоћни уџбеник, Tehnološko metalurški fakultet, Beograd, 2017; ISBN 978-86-7401-349-6
6. Драгослав Стаменковић, група аутора, and Карло Раић, Стоматолошки материјали, Књига 2, уџбеник, Стоматолошки факултет, Београд, 2012, 509; ISBN 978-86-80953-33-5
7. Татјана Волков-Хусовић and Карло Раић, Металуршке пећи, монографија, СИМС, 2010, 198; ISBN 978-86-87183-15-5
8. Драгослав Стаменковић, група аутора, and Карло Раић, Стоматолошки материјали, Књига 1, уџбеник, Стоматолошки факултет, Београд, 2009, 582; ISBN 978-86-80953-27-4
9. Татјана Волков-Хусовић and Карло Раић, Горива и сагоревање, уџбеник, СИМС, 2008, 204; ISBN 978-86-87183-04-9
10. Звонимир Поповић and Карло Раић, Пећне атмосфере, монографија, СИМС, 2006, 113; ISBN 86-904393-3-1
11. Звонимир Поповић and Карло Раић, Пећи и пројектовање у металургији - Збирка решених задатака, помоћни уџбеник, ТМФ, БУ, 1988, 298; ISBN 86-7401-014-8
12. Звонимир Поповић and Карло Раић, Енергетика металуршких пећи - Збирка решених задатка, помоћни уџбеник, ТМФ, БУ, 1986, 183; ISBN 86-80079-11-1